6" Double storey straight up internal flue system - Stainless Steel
Please note you are purchasing a full Twin Wall set. This set can be returned but individual parts/items from the set CANNOT be returned. We do not except returns and offer refunds for parts/items that are part of Twin Wall sets.
This set creates approx. 6,5m stack measured from the stove. If you work out the measurement B+C+D+E+F+G in meters this will tell you how many meters of twin wall you will require.
You may increase the height of the system by adding more straight lengths to the pack.
You will find a detailed list of items in this set in SPECIFICATIONS tab.
This twin wall insulated flue system has been designed for a double storey straight flue, that runs through the inside of the house terminating through the roof. In this system the Twin wall adapter can connect directly to the stove collar or a short piece of stove pipe (not included) which starts the system. The flue passes through 2 floor levels and all the firestop kits and finishing plates are provided accordingly. Once the straight flue passes in to the loft it goes through the roof level supported by an adjustable roof support and terminates through the roof, passing through an adjustable flashing and finishing off with a rain cap terminal.
If you wish to ask any questions or if you would like us to work out your twin wall system for you then please just e mail pictures or a rough sketch and measurements to us. We offer a completely free no obligation flue design and quote service.
G70 when in an enclosure and G50 when not enclosed.
Increasing/Standard adapter:
|
x1
|
Weathering rain cap:
|
x1
|
Pipe length 1000mm:
|
x6
|
Pipe length 500mm:
|
x1
|
Pipe length 250mm:
|
x1
|
Narrow locking band:
|
x8
|
Firestop Masking Plate:
|
x1
|
Fire-stop set:
|
x1
|
Roof support:
|
x1
|
NU-LEAD roof flashing:
|
x1
|
Storm Collar:
|
x1
|
Have a question about this product? Send it to us via the form below and we will get back to you as soon as possible with an answer.