6" External flue system kit - Matt Black
Please note you are purchasing a full Twin Wall set. This set can be returned but individual parts/items from the set CANNOT be returned. We do not except returns and offer refunds for parts/items that are part of Twin Wall sets.
This set creates approx. 4,5m stack measured from the stove up. If you work out the measurement B+C in meters this will tell you how many meters of twin wall you will require.
You may increase the height of the system by adding more straight lengts to the pack.
You will find a detailed list of items in this set in SPECIFICATIONS tab.
This Insulated twin wall system has been designed for a single storey external installation. The twin wall flue adaptor comes off the top of the stove and connects to a 45 degree bend that takes the flue through the wall. Once the flue is outside the system provides you with all the items to penetrate the wall and support the flue on the outside of the building. Brackets are included to take the flue up to roof level where the rain cap provides termination of the flue.
If you wish to ask any questions or if you would like us to work out your twin wall system for you then please just e mail pictures or a rough sketch and measurements to us. We offer a completely free no obligation flue design and quote service.
G70 when in an enclosure and G50 when not enclosed.
Increasing/Standard adapter:
|
x1
|
Bend 45 degrees:
|
x1
|
Long branch adjustable tee with plug:
|
x1
|
45 degrees wall sleeve:
|
x1
|
Base support unit:
|
x1
|
Weathering rain cap:
|
x1
|
Pipe length 1000mm:
|
x3
|
Pipe length 500mm:
|
x1
|
Pipe length 250mm:
|
x1
|
Wall bracket 130mm-210mm:
|
x2
|
Narrow locking band:
|
x9
|
Wide locking band:
|
x1
|
Have a question about this product? Send it to us via the form below and we will get back to you as soon as possible with an answer.